The Interactive Touch Foil, quickly enabling a touch screen in your
ordinary glass world. 's large format flexible touch panel, cover
from 30 to has 3 key parts. 1st is film sensor, 2nd is electronics
controller, we call it eBoard, 3rd is driver. Film sensor is a
green technology product, has high transparency, light and thin.
the embedded nano wire grid is a sensor network, that can precisely
positioning hands touch action. It use sensing technology, easily
change an to bulletproof touch screen. eBoard use SoC
architecture, so the PCB is small and strong noise filtering
algorithm, It can detect weak signal that caused by hands.
Driver support Windows 7/8, include 32 bit and 64 bit. version,
Android 4.4 up version. has two version, one is cling film version,
It designed for interactive window and could be peeled off for
reusing. Another is permanent version, once you peel off the cover
layer and laminate onto the glass. the sensor will be permanently
fixed. fi and bulletproof are the application can fulfill with
this requirement. It Will bring added and fun to use
The Interactive Touch Foil Features
Safety and robust
Antiscratch, laminate on the back of
Waterproof, dustproof, bulletproof,
No expose components, safety.
No mechanical components with long life
Industrial temperature range: -20 °C to +80°C
Art and SciFi
High transparency ≥93%, glasslevel transparency
No bezel of touch area
Thin and light, the sensor thickness only 0.17mm
Thruglass touch, the maximum thickness of glass can reach 20mm.
Only hands valid, no touch action of metal, plastic, and so on.
Zero pressure touch, even with glove.
Mouse function with Zoom in/out and rotation.
2 points Multitouch, Support TUIO & Win Native
Precise touch & realtime response
Low power consumption, the maximu consumption is only 0.5w
Flexible, could be applied to curve surface screen
The film sensor could be laminated on any smooth nonmetallic flat
Various size from 32" to 65", lowest cost customization.
For More introduction about touch foil,pls check this linked file:Interactive touch foil-Andrew.doc.pdf
Pls check this file in PDF for how to paste touch film: Guide for the paste of touch foil permanent type.pdf
Suitable for Store window displays,Indoor / outdoor
kiosks,Exhibitions,Visitor attractions, museums Touch tables,
Q: What OS you support?
A: The Touch Foil support Windows XP/ 7/ 8, Linux, include 32 bit
& 64 bit system and Android.
Q: How can I use this amazing product?
A: Laminate on the back of glass, connect and then plus the USB
interface to your PC, config the driver, then you can use it. Very
easy and simple for using, once config completed, you can use it as
easy as iPad . We also have video guide of lamination and driver
Q: How many points your multitouch support?
A: So far, 2 points, It's true multitouch and we will support 10
more points in not far future.
Q: How many kinds of your Touch Foil?
A: We have 2 kinds Touch Foil.
Permanent version: tackiness Adhesive Type use for Kiosk, include
Digital Signage, POS, etc. It can be attached to glass and most
smooth non-metallic surfaces other than Acrylic/Polycarbonate.
Cling Filmv ersion: Vacuum adhesion Adhesive Type Rear projection
displays.. It can be attached to glass/Bomb proofed Windows
Q: How's the handwriting performance?
A: The Touch Foil have best-in-class handwriting performance, high
speed and good linearity.
Q: I found your controller board are detachable, what's the
A: The Touch Foil have 3 core parts, each are Touch film - Sensor,
Controller board, Driver - Software, we use module-design method.
the main advantages of detachable is that when you laminate the
Touch Foil on glass, no need to think about water-proof of
Controller board, also when the Controller board broken, you can
easily replace by a new board. your maintenance would be easy and
Q: What solution you provide?
A: We provide many solutions to our partners; include all-in-one
touch device, magic touch window, mirror touch, touch table, touch
Kiosk, touch Digital Signage, interactive projection, touch wall,
interactive ground, and so on.
Q: For magical touch window, I found the big PC and Power on/off is
a tough problem, any solution?
A: Yes, you need to find a safety and free space for your big PC,
also power on/off every day. If you use ProControl, you can solve
these problems. ProControl is a small size & remote-able
industrial PC, locate the ProControl on the top of ceiling. or just
hang-up on the wall, power on/off by the remote. It would make you
easily use Magic touch window. just like switch on/off something.
Q: The length of USB is only 10M valid, the distance between my
control center and thru- glass touch screen is far more than 30M.
A: Yes, we have verified USB extender for your long distance
Q: About digital signage application, How about the distance
between LCD and Touch Foil?
A: Depends on different LCD manufacturer, some are minimum 1mm,
some are 5mm, others are 8mm, even more. The display card of LCD is
the key noise, so select a best display card of LCD is important.
in accord of our experience, the display card provide by big
manufacturer is better. a test is necessary before your LCD
Q: How about software application?
A: We have many software application partners, they can provide
customizing software application service. Also we have a Software
Platform - SWPF, It's a general application platform, the standard
version is free. you can customizing the touch UI and contents by
yourself. If you want details, please contact with our sales.
Q: For safety, we use thru-glass touch, how about sound?
A: The Resonant Sound is a proper solution.
Q: Can I connect two Touch Foil to one PC?
A: No, the Touch Foil will not work. Because Touch Foil touch is
USB auto-detective. Two Touch Foil will make driver confusion.
Q: I found the noise is big, when I integrated Touch Foil with LCD,
How can I get rid of the noise?
A : 1st, you can connect the Touch Foil with the ground wire, so as
to get rid of static electricity. 2nd make the gap between LCD and
the Touch Foil much more. 3rd make sure that the
lamination-substrate is glass not others. Transparent plastic is
OK, but gather static electricity function is strong, so, it's not
a stable substrate.